W&L Home Page

W&L Calendar Page

Williams & Lipton Company
State Screw Products - Starting: Saturday, February 29th, 2020, 9:00 AM EST and Lots begin ending: Tuesday, March 3rd, 2020 11:00 AM (EST)

Item Description
A.DESCRIPTION: Preview Times: INSPECTION OF ITEMS IS HIGHLY RECOMMENDED!
MORE INFO: Monday, March 2nd, 2020 - 9:00am to 5:00pm (EST) or by appointment only.
B.DESCRIPTION: How much time is left? Click on this lot for more information.
MORE INFO: This auction starts ending Tuesday, March 3rd, 2020 at 11:00am (EST). On the morning of March 3rd there will be a time remaining clock next to each lot. This displays the time remaining before that lot is scheduled to close if there is not extended bidding. YOU MUST REFRESH THE SCREEN TO KEEP THAT TIME ACCURATE. To refresh simply click on the refresh word below the clock. If you have questions please call us 248.478.2000 or email jared@williamsandlipton.com.
C.DESCRIPTION: This auction features EXTENDED BIDDING! View this lot to learn more.
MORE INFO: This auction features extended bidding. Any lot that gets a bid within five minutes of its Scheduled Closing Time will remain open for bids past its normal close, it will go into extended bidding. It will remain open until there are no bids on that lot for five minutes. This only affects lots with last minute bids, other lots will continue to close at their normal times. If you have questions please call us 248.478.2000 or email jared@williamsandlipton.com.
D.DESCRIPTION: This auction STARTS TO CLOSE at 11:00 AM EST at a rate of 2 lots per minute. Click this lot to learn more.
MORE INFO: This auction will close at the rate of two lots per minute starting with lot 1. For Example: Lots 1-2 will close at 11:00am Lots 3-4 will close at 11:01am This continues until all lots are closed. If you have questions please call us 248.478.2000 or email jared@williamsandlipton.com. All Times are Eastern Daylight Time.
E.DESCRIPTION: Check out @ 44605 Macomb Industrial Dr, Clinton Twp, MI 48036
MORE INFO: Removal Dates & Times: All Removal by Appointment Only. Please call 248-478-2000 to make an appointment for Wednesday - Friday, March 4th - 6th, 2020 from 9:00am to 5:00pm. All items must be picked up by Friday, March 6th, 2020 unless arrangements have been made with us prior to the end of the auction.
F.DESCRIPTION: The following rigging companies are prepared to quote your loading needs.
STC RIGGING: DAN SHEPERD - 810.542.0086
D & D MACHINERY MOVERS: JOHN COVA - 586.405.8002
1.DESCRIPTION: ROLL OF PLASTIC
2.DESCRIPTION: 3" X 6" BELT LACER W/ FASTENERS & BELTS
3.DESCRIPTION: OIL CANS
4.DESCRIPTION: 2 PIPE WRENCHES, 18" & 14"
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
5.DESCRIPTION: TRUECRAFT 18" PIPE WRENCH
6.DESCRIPTION: 14" ALUMINUM PIPE WRENCH
7.DESCRIPTION: WRENCHES IN 1 BIN
8.DESCRIPTION: MISC. DRILL BITS IN 2 BOXES
9.DESCRIPTION: 4# SLEDGE HAMMER
10.DESCRIPTION: SCREW DRIVERS IN 1 BOX
11.DESCRIPTION: ALLEN WRENCHES IN 1 BOX
12.DESCRIPTION: DRILL BITS IN 1 BIN
13.DESCRIPTION: CUTTERS & MISC. IN 1 BOX
14.DESCRIPTION: REAMERS IN 1 BIN
15.DESCRIPTION: ADJUSTABLE WRENCHES & PLIERS IN 1 BOX
16.DESCRIPTION: PULLER
17.DESCRIPTION: TAPS IN 1 BOX
18.DESCRIPTION: WRENCHES IN 1 BOX
19.DESCRIPTION: WELDING WIRE & VALVE
20.DESCRIPTION: PORTER CABLE CIRCULAR SAW
21.DESCRIPTION: MISC. IN 1 BIN & 2 BOXES
22.DESCRIPTION: HACK SAWS, BLADES & FILES
23.DESCRIPTION: 4-1/2" ANGLE GRINDER & WHEELS
24.DESCRIPTION: BRASS HAMMERS IN 1 BOX
25.DESCRIPTION: R/N BATTERY CHARGER
26.DESCRIPTION: PRY BARS & 4 WAY
27.DESCRIPTION: LIFTING STRAPS
28.DESCRIPTION: 2 WEIDER DUMB BELLS W/ 4) 5# WEIGHTS
29.DESCRIPTION: CLEAN UP TOOLS
30.DESCRIPTION: BINDER
31.DESCRIPTION: 3' 3 HOOK CHAIN SLING
32.DESCRIPTION: DOUBLE END MILLS IN 1 BOX
33.DESCRIPTION: REAMERS IN 1 BIN
34.DESCRIPTION: REAMERS IN 1 BOX
35.DESCRIPTION: REAMERS IN 1 BOX
36.DESCRIPTION: 5 C-CLAMPS
37.DESCRIPTION: HEX WRENCH SET
38.DESCRIPTION: HOLE SAWS
39.DESCRIPTION: CUTTERS IN 1 BOX
40.DESCRIPTION: MAGNET
41.DESCRIPTION: DEWALT CORDLESS DRILL W/ BATTERY & CASE (NO CHARGER)
42.DESCRIPTION: LASTEK WELDING KIT
43.DESCRIPTION: HELICOIL
44.DESCRIPTION: TAP HANDLES W/ DIES
45.DESCRIPTION: CENTRAL PNEUMATIC 3/8" FILTER REGULATOR
46.DESCRIPTION: DRILL BITS IN 2 BOXES
47.DESCRIPTION: DRILL BITS & MISC. IN 1 BOX
48.DESCRIPTION: 3 SPADE DRILLS W/ BITS
49.DESCRIPTION: ALLEN WRENCHES
50.DESCRIPTION: 2 DREMELS
51.DESCRIPTION: 3 GREASE GUNS
52.DESCRIPTION: SPRAY NOZZLES IN 2 BOXES
53.DESCRIPTION: DRILL BITS IN 1 BOX
54.DESCRIPTION: DRILL BITS IN 1 BIN
55.DESCRIPTION: KEYWAY CUTTERS IN 2 BINS
56.DESCRIPTION: CUTTERS IN 1 BOX
57.DESCRIPTION: METAL BINS
58.DESCRIPTION: 4' ALUMINUM STEP LADDER
59.DESCRIPTION: 2 PARTS CABINETS
60.DESCRIPTION: HEAVY DUTY ELECTRICAL CORD
61.DESCRIPTION: AIR HOSE W/ 2 REGULATORS
62.DESCRIPTION: 2 PORTABLE STOOLS
63.DESCRIPTION: 18 DRAWER PARTS CABINET
64.DESCRIPTION: LEE SMELTING POT
65.DESCRIPTION: THIN BITS IN 1 BOX
66.DESCRIPTION: ADJUSTABLE CABLE TIE GUN
67.DESCRIPTION: 9 GOLF CLUBS
68.DESCRIPTION: 6 GOLF CLUBS
69.DESCRIPTION: 6 METAL/WOODS
70.DESCRIPTION: GOLF BAG W/ CLUBS
71.DESCRIPTION: WHEEL BARROW
72.DESCRIPTION: YARD MACHINES 5 HP TILLER
73.DESCRIPTION: BANDING OUTFIT
74.DESCRIPTION: WEBER GENESIS SILVER PROPANE GRILL
75.DESCRIPTION: HAND CART
76.DESCRIPTION: 4' PORTABLE CART
77.DESCRIPTION: 4' PORTABLE CART
78.DESCRIPTION: 3' STEP LADDER
79.DESCRIPTION: 4 WHEEL STOCK CART
80.DESCRIPTION: MISC. CHAIRS & STOOLS
81.DESCRIPTION: UTILITECH INDUSTRIAL FAN
82.DESCRIPTION: HAND CART
83.DESCRIPTION: METRIC RING GAGES IN 1 BOX
84.DESCRIPTION: METRIC PLUG GAGES IN 1 BOX
85.DESCRIPTION: OFF-SET BORING HEAD
86.DESCRIPTION: MAGNETIC DIAL INDICATOR
87.DESCRIPTION: 2 INDICATOR STANDS
88.DESCRIPTION: DIAL INDICATOR W/ GRANITE BASE
89.DESCRIPTION: DIAL INDICATOR W/ GRANITE BASE
90.DESCRIPTION: DIAL INDICATOR W/ GRANITE BASE
91.DESCRIPTION: 12" X 9" X 2" GRANITE SURFACE PLATE
92.DESCRIPTION: 2 PIN GAGE SETS
93.DESCRIPTION: STARRETT 10-11 MICROMETER
94.DESCRIPTION: STARRETT 11-12 MICROMETER
95.DESCRIPTION: STARRETT 8-9 MICROMETER
96.DESCRIPTION: MITUTOYO 0-1 MICROMETER
97.DESCRIPTION: CHAMFER CHEK GAGE
98.DESCRIPTION: GEM PRECISION GAGE
99.DESCRIPTION: 2 PRECISION STANDS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
100.DESCRIPTION: MITUTOYO 12-13 MICROMETER
101.DESCRIPTION: MITUTOYO 146-131 PRECISION GAGE
102.DESCRIPTION: 3 ASSORTED MICROMETERS
103.DESCRIPTION: MICROMETERS IN 1 BOX (FOR REPAIR)
104.DESCRIPTION: 2 MICROMETERS, 1-2" & 2-3"
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
105.DESCRIPTION: MITUTOYO 9-10 MICROMETER
106.DESCRIPTION: GAGE BLOCK SET
107.DESCRIPTION: DIAL GAGES, CALIPER & DEPTH GAGE
108.DESCRIPTION: 2 BROWN & SHARPE DIAL CALIPERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
109.DESCRIPTION: STARRETT DEPTH GAGE
110.DESCRIPTION: BROWN & SHARPE 12" CALIPER
111.DESCRIPTION: MITUTOYO 12" CALIPER
112.DESCRIPTION: 7 PIECE MICROMETER SET
113.DESCRIPTION: 8 STARRETT MICROMETERS
114.DESCRIPTION: 7 MITUTOYO MICROMETERS
115.DESCRIPTION: 11 STARRETT MICROMETERS
116.DESCRIPTION: 4 MICROMETERS & 2 SNAP GAGES
117.DESCRIPTION: TAPS & CUTTERS IN 1 BOX
118.DESCRIPTION: MISC. INSPECTION
119.DESCRIPTION: MITUTOYO 6-7 MICROMETER
120.DESCRIPTION: STARRETT 12-16 MICROMETER
121.DESCRIPTION: DRILL BITS IN 1 BOX
122.DESCRIPTION: TAPS IN 1 BOX
123.DESCRIPTION: SPADE DRILL INSERTS IN 1 BOX
124.DESCRIPTION: PITCH SAW BLADES IN 1 BIN
125.DESCRIPTION: TAPS IN 1 BIN
126.DESCRIPTION: DRILLS IN 1 BIN
127.DESCRIPTION: CUTTERS IN 1 BIN
128.DESCRIPTION: END MILLS & CUTTERS IN 1 BIN
129.DESCRIPTION: CARBIDE INSERTS IN 1 BOX
130.DESCRIPTION: HIGH SPEED TOOLING IN 1 BOX
131.DESCRIPTION: CARBIDE DRILLS & REAMERS IN 1 BOX
132.DESCRIPTION: DRILLS & TAPS IN 1 BOX
133.DESCRIPTION: CUTTERS IN 1 BOX
134.DESCRIPTION: CARBIDE INSERTS & CUTTERS IN 1 BOX
135.DESCRIPTION: TAPS IN 1 BOX
136.DESCRIPTION: TAPS IN 1 BOX
137.DESCRIPTION: REAMERS IN 1 BOX
138.DESCRIPTION: REAMERS IN 1 BOX
139.DESCRIPTION: TAPS IN 1 BOX
140.DESCRIPTION: CARBIDE INSERT HOLDERS IN 1 BIN
141.DESCRIPTION: HIGH SPEED TOOLING IN 1 BOX
142.DESCRIPTION: DEBURRING BITS IN 1 BIN
143.DESCRIPTION: HIGH SPEED CUTTERS IN 1 BIN
144.DESCRIPTION: THREAD CHASERS IN 1 BIN
145.DESCRIPTION: CHUCK KEYS
146.DESCRIPTION: TAPS IN 2 BINS
147.DESCRIPTION: MAGNETIC LIGHT
148.DESCRIPTION: DRILLS IN 1 BOX
149.DESCRIPTION: CRAFTSMAN 6" BENCH GRINDER
150.DESCRIPTION: CHAIN IN 1 BUCKET
151.DESCRIPTION: 2 FANUC MOTORS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
152.DESCRIPTION: DRILL BITS IN 1 TUB
153.DESCRIPTION: CARBIDE TIPPED BITS IN 1 BOX
154.DESCRIPTION: 3" PNEUMATIC VISE W/ FOOT CONTROL
155.DESCRIPTION: 3 SCREW MACHINE STOCK STANDS
156.DESCRIPTION: CRAFTSMAN 5 DRAWER TOOL BOX
157.DESCRIPTION: TOOL BOX W/ CASTERS
158.DESCRIPTION: CRAFTSMAN PORTABLE TOOL CABINET
159.DESCRIPTION: CRAFTSMAN TOOL BOX W/ CONTENTS
160.DESCRIPTION: 2013 MIYANO INNOVATION CITIZEN BNA-42DHY CNC TURNING CENTER, 4,626 HOURS, 2014 LNS ALPHA 552 BAR FEED, 2013 LNS YOSHIDA YAZ-E6018A CHIP CONVEYOR, FANUC Oi-TD CNC CONTROLS, 45 KVA TRANSFORMER
SERIAL #: O1DK0293
161.DESCRIPTION: 2011 CITIZEN CINCOM EVOLUTION MODEL 1M7PL TYPE A32VNPL CNC LATHE W/ 2011 MARUBENI C332 BAR FEED, S/N C22001127093, COOL BLASTER 850 MIST CONTROL, FARGO 20 KVA TRANSFORMER
SERIAL #: V54122
162.DESCRIPTION: 2004 CITIZEN CINCOM MODEL L32V11 SLANT BED CNC LATHE W/ 2005 LNS HYDROBAR EXPRESS 322 BAR FEED, S/N 131342, COOL BLASTER SYSTEM A MIST CONTROL & TRANSFORMER
SERIAL #: V13178
163.DESCRIPTION: 2007 CITIZEN CINCOM MODEL L20 V11 CNC LATHE W/ LNS HYDROBAR EXPRESS 220 BAR FEED & TRANSFORMER
SERIAL #: 15778
164.DESCRIPTION: 2001 CITIZEN CINCOM MODEL L25 CNC LATHE, MFG# L4253211141, W/ HYDROBAR EXPRESS 326-52 BAR FEED & TRANSFORMER
SERIAL #: V12038
165.DESCRIPTION: 1999 CITIZEN CINCOM MODEL L20 CNC LATHE W/ LNS HYDROBAR 226 BAR FEED & TRANSFORMER
SERIAL #: Q10263
166.DESCRIPTION: 1998 CITIZEN CINCOM MODEL L20 CNC LATHE W/ LNS HYDROBAR 226 BAR FEED & TRANSFORMER
MORE INFO: NOTE: MACHINE NOT RUNNING, BAD SERVO MOTOR ON SUB SPINDLE, MAY NEED NEW DRIVEAWELL, NEEDS NEW CABLE ON DRIVE UNIT, BAR LOADER NEEDS REPAIR
SERIAL #: Q1172
167.DESCRIPTION: BROWN & SHARPE ULTRAMATIC RS #2, 1-5/8" CAPACITY AUTOMATIC SCREW MACHINE, 4 SPEED
SERIAL #: 542-2-9400
168.DESCRIPTION: BROWN & SHARPE ULTRAMATIC RS #3 AUTO SCREW #2 CHUCK 2-3/8" AUTOMATIC SCREW MACHINE, 4 SPEED
SERIAL #: 542-3-9130
169.DESCRIPTION: BROWN & SHARPE ULTRAMATIC #2 1-1/4" AUTOMATIC SCREW MACHINE, 2 SPEED
SERIAL #: 542-2-8179
170.DESCRIPTION: BROWN & SHARPE MODEL 2G 1-1/2" CAPACITY AUTOMATIC SCREW MACHINE W/ FEEDER
SERIAL #: 542-2-481
171.DESCRIPTION: BROWN & SHARPE MODEL 2G 2" CAPACITY AUTOMATIC SCREW MACHINE W/ FEEDER
SERIAL #: 542-2-258
172.DESCRIPTION: BROWN & SHARPE MODEL 0G AUTOMATIC SCREW MACHINE
SERIAL #: 542-0-285
173.DESCRIPTION: BROWN & SHARPE MODEL 0G AUTOMATIC SCREW MACHINE
SERIAL #: 542-0-1170
174.DESCRIPTION: BROWN & SHARPE MODEL 2G 1-1/2" CAPACITY AUTOMATIC SCREW MACHINE W/ LIPE-ROLLWAY CORP MODEL 87-AML AUTOMATIC BAR FEED MAGAZINE LOADING FEEDER, S/N 4105
SERIAL #: 10300
175.DESCRIPTION: BROWN & SHARPE 1-1/4" CAPACITY AUTOMATIC SCREW MACHINE W/ LIPE-ROLLWAY CORP MODEL 87-AML AUTOMATIC BAR FEED MAGAZINE LOADING FEEDER, S/N 6162
SERIAL #: 542-2-453
176.DESCRIPTION: BROWN & SHARPE MDOEL 0G 1-1/2" CAPACITY AUTOMATIC CREW MACHINE W/ LIPE-ROLLWAY CORP MODEL 87-AML AUTOMATIC BAR FEED MAGAZINE LOADING FEEDER, S/N 13482
SERIAL #: 542-0-284
177.DESCRIPTION: POWERMATIC MODEL 87 VERTICAL BAND SAW W/ BLADE WELDER
SERIAL #: 887747
178.DESCRIPTION: CLAUSING COLCHESTER 15" X 4" GEARED HEAD ENGINE LATHE
SERIAL #: 6-0015-14752
179.DESCRIPTION: BROWN & SHARPE 618 MICROMASTER HAND FEED SURFACE GRINDER
SERIAL #: 523-6184-6664
180.DESCRIPTION: BRIDGEPORT 1-1/2 HP VERTICAL MILLING MACHINE W/ MSC 2 AXIS DIGITAL READOUT & 42" X 9" T-SLOT TABLE
SERIAL #: 138793
181.DESCRIPTION: RONG-FU 4-1/2" MODEL RF-415 HORIZONTAL METAL CUTTING BAND SAW W/ ROLLER STAND
SERIAL #: 154514
182.DESCRIPTION: BROWN & SHARPE SCREW MACHINE (PARTS ONLY)
183.DESCRIPTION: BROWN & SHARPE MDOEL #4, 3" CAPACITY AUTOMATIC SCREW MACHINE W/ BROWN & SHARPE FEEDER
SERIAL #: 542-2-215
184.DESCRIPTION: BARRET CENTRIFUGALE, 15 LOADS PER HOUR W/ 425# LOAD CAPACITY, LOAD WORK 425# AT 900 RPM MAX SPEED
SERIAL #: 11000550-E1 62373
185.DESCRIPTION: WF WELLS MODE3L W9 HORIZONTAL METAL CUTTING BAND SAW W/ 8" FEED ATTACHMENT (NOT IN SERVICE)
SERIAL #: 803300
186.DESCRIPTION: FACTORY CAT MODEL 34 WALK BEHIND FLOOR MACHINE W/ ON-BOARD CHARGER
187.DESCRIPTION: 2017 CHICAGO PNEUMATIC MODEL QRS 150 TMRO 15 HP ROTARY SCREW AIR COMPRESSOR
SERIAL #: 1TJ077765
188.DESCRIPTION: REID MODEL 2C, 6" X 18" HAND FEED SURFACE GRINDER
189.DESCRIPTION: REID MODEL 618HP HYDRAULIC SURFACE GRINDER
SERIAL #: 15326
190.DESCRIPTION: GLOBE 1/2 HP DEBURRING MIXER
191.DESCRIPTION: 6" VERTICAL SANDER
192.DESCRIPTION: CINCINNATI 2-18PL HORIZONTAL MILLING MACHINE
193.DESCRIPTION: ROCKWELL 52-611, 6" BELT SANDER
SERIAL #: 82K01653
194.DESCRIPTION: SUNDSTRAND MODEL #00 RIDIG MILL
SERIAL #: 50888
195.DESCRIPTION: BRIDGEPORT 1 HP VERTICAL MILLING MACHINE, 42" X 9" T-SLOT TABLE
SERIAL #: 50645
196.DESCRIPTION: 4 HEAD DRILLING STATION
197.DESCRIPTION: LOGAN 10" X 26" SHOP LATHE, MODEL 200
198.DESCRIPTION: BROWN & SHARPE MODEL #2 HAND SCREW MACHINE W/ TURRET
SERIAL #: 540-2-38
199.DESCRIPTION: HARDINGE SUPER PRECISION MODEL DV-59/DSM-59 SECOND OPERATION LATHE
SERIAL #: DV-59-19376-T
200.DESCRIPTION: HARDINGE SUPER PRECISION MODEL DV-59/DSM-59 SECOND OPERATION LATHE
SERIAL #: DV-59-15913
201.DESCRIPTION: POWERMATIC 1200SC PEDESTAL TYPE DRILL PRESS W/ PROCUNIER MODEL 3 LEAD SCREW TAPPING HEAD, S/N B-6992
SERIAL #: 8420S095
202.DESCRIPTION: POWERMATIC 1200 PEDESTAL TYPE DRILL PRESS
SERIAL #: 9320V113
203.DESCRIPTION: BROWN & SHARPE MODEL 2G 1-1/2" CAPACITY AUTOMATIC SCREW MACHINE
SERIAL #: 542-2-92
204.DESCRIPTION: BROWN & SHARPE MODEL 2G 1-1/2" CAPACITY AUTOMATIC SCREW MACHINE
SERIAL #: 12464
205.DESCRIPTION: VERTICAL TAPPING MACHINE 5/8-11 TAP, 11 -LEAD SCREW W/ HYDRAULIC UNIT
206.DESCRIPTION: HARDINGE SUPER PRECISION MODEL DV-59/DSM-59 SECOND OPERATION LATHE
SERIAL #: DV-59-19744-T
207.DESCRIPTION: BROWN & SHARPE MODEL #2 HAND SCREW MACHINE W/ TURRET
SERIAL #: 540-2-289
208.DESCRIPTION: HORIZONTAL DRILL STATION & STEEL STAND
209.DESCRIPTION: CALAMAR K-K2100 TOOL GRINDER W/ STAND
210.DESCRIPTION: INGERSOL RAND MODEL 2340 VERTICALLY MOUNTED TANK AIR COMPRESSOR
211.DESCRIPTION: SPEEDAIRE MODEL 1WD55 AIR COMPRESSOR W/ VERTICALLY MOUNTED TANK, 5 HP, 3 PHASE
212.DESCRIPTION: GAGEMASTER MODEL 29/6M3 OPTICAL COMPARATOR W/ GMC 2 AXIS DIGITAL READOUT
SERIAL #: 1465681090
213.DESCRIPTION: KENNEDY 10 DRAWER TOOL BOX
214.DESCRIPTION: TOGOSHISEIKI HARDNESS TESTER
SERIAL #: HT001
214A.DESCRIPTION: 6' WOOD TOP WORK BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
215.DESCRIPTION: 2 HON FILE CABINETS W/ KEYS
216.DESCRIPTION: U-SHAPED WORKSTATION W/ CHAIR
217.DESCRIPTION: BROTHER DCP8060 LASER COPIER, PRINTER, SCANNER
218.DESCRIPTION: BROTHER HL-2140 LASER PRINTER
219.DESCRIPTION: MISC. EMPTY TOOL CASES
219A.DESCRIPTION: 2 DRAWER WORK STATION W/ CHAIR
220.DESCRIPTION: PIN GAGE SET
221.DESCRIPTION: CABINET W/ CONTENTS
222.DESCRIPTION: PIN GAGE SET
223.DESCRIPTION: PIN GAGE SET
224.DESCRIPTION: PIN GAGE SET
225.DESCRIPTION: RING & THREAD GAGE W/ MULTI DRAWER CABINET
226.DESCRIPTION: PIN GAGE SET
227.DESCRIPTION: PIN GAGE SET
228.DESCRIPTION: PIN GAGE SET
229.DESCRIPTION: PIN GAGE SET
230.DESCRIPTION: PIN GAGE SET
231.DESCRIPTION: PIN GAGE SET
232.DESCRIPTION: 5 TIER SHELF UNIT
233.DESCRIPTION: END MILLS IN 1 BOX
234.DESCRIPTION: DRILL CABINET W/ DRILLS
235.DESCRIPTION: DRILL CABINET W/ DRILLS
236.DESCRIPTION: DRILL CABINET W/ DRILLS
237.DESCRIPTION: DRAFTING TABLE W/ STOOL
238.DESCRIPTION: GEORGE SCHMIDT MANUAL STAMPER W/ STAMPS
239.DESCRIPTION: 6' STEEL BENCH W/ 2 CHAIRS
240.DESCRIPTION: 2 BUSS PLUGS, 1) 100A,1) 30A
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
241.DESCRIPTION: 2 DOOR STORAGE CABINET W/ CONTENTS
242.DESCRIPTION: 2 DOOR STORAGE CABINET W/ CONTENTS
243.DESCRIPTION: 2 PARTS BINS
244.DESCRIPTION: TRADEMARK 6 DRAWER CABINET W/ DRILLS
245.DESCRIPTION: 6' WORK BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
246.DESCRIPTION: GOLD STAR MICROWAVE W/ STAND
247.DESCRIPTION: KEURIG COFFEE BREWER
248.DESCRIPTION: MICROWAVE, TOASTER & CROCKPOT
249.DESCRIPTION: DISHWARE & MISC. IN CUPBOARDS
250.DESCRIPTION: 8' PICNIC TABLE
251.DESCRIPTION: 8' PICNIC TABLE
252.DESCRIPTION: PORTABLE CART W/ CONTENTS
253.DESCRIPTION: DEMAGNITIZER
254.DESCRIPTION: BMC PC-101 SHARPENING FIXTURE
255.DESCRIPTION: 4 TOOL GRINDING FIXTURES
256.DESCRIPTION: HARDINGE HV-4N COLLET CLOSER
257.DESCRIPTION: DRESSER
258.DESCRIPTION: R8 TOOLING IN 1 BOX
259.DESCRIPTION: DRESSER W/ CASE
260.DESCRIPTION: 3 JACOB DRILL CHUCKS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 3
261.DESCRIPTION: JACOB 18N DRILL CHUCK
262.DESCRIPTION: 3 DRILL CHUCKS
263.DESCRIPTION: 3" PRECISION VISE
264.DESCRIPTION: 6" X 8" ADJUSTABLE T-SLOT TABLE
265.DESCRIPTION: PALMGREN 2-1/2" ANGLE VISE
266.DESCRIPTION: 3" PRECISION VISE
267.DESCRIPTION: TOOLING IN 1 BOX
268.DESCRIPTION: HOLD DOWN TOOLING
269.DESCRIPTION: 5' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
270.DESCRIPTION: 4" VISE
271.DESCRIPTION: 2-1/2" VISE
272.DESCRIPTION: HARDINGE CROSS SLIDE
273.DESCRIPTION: ERON 4" QUICK RELEASE VISE
274.DESCRIPTION: 4" QUICK RELEASE VISE
275.DESCRIPTION: ERON 2-1/2" VISE
276.DESCRIPTION: 4-1/4" QUICK RELEASE VISE
277.DESCRIPTION: 2-1/2" VISE
278.DESCRIPTION: HARDINGE HM-4 COLLET CLOSER
279.DESCRIPTION: ZAGAR SPEED CHUCK
280.DESCRIPTION: HARDINGE VERTICAL CUT OFF
281.DESCRIPTION: HARDINGE TOOLING
282.DESCRIPTION: SPERMAN MIGHTY MIDGET FIXTURE
283.DESCRIPTION: MAGNET STANDS & DIAL GAGE
284.DESCRIPTION: GOEMETRIC DIE HEAD
285.DESCRIPTION: 2 GEOMETRIC 9/16 & 5/16" DIE HEADS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
286.DESCRIPTION: 2 GEOMETRIC 9/16 & 5/16" DIE HEADS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
287.DESCRIPTION: 3/4" GEOMETRIC DIE HEAD W/ CHASERS
288.DESCRIPTION: GEOMETRIC 5/16" DIE HEAD W/ CHASERS
289.DESCRIPTION: GEOMETRIC 9/16" DIE HEAD W/ CHASERS
290.DESCRIPTION: 3 GEOMETRIC DIE HEADS, 3/4, 9/16, 5/16"
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 3
291.DESCRIPTION: STM R8 TAPPING HEAD
292.DESCRIPTION: 10" 3 JAW CHUCK
293.DESCRIPTION: 6 PIECE WARNER & SWASEY TOOL HOLDERS
294.DESCRIPTION: 6' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
295.DESCRIPTION: MIGHTY 6" MACHINE VISE W/ SWIVEL BASE
296.DESCRIPTION: 6" MACHINE VISE
297.DESCRIPTION: DRILL BUSHINGS IN 2 BINS
298.DESCRIPTION: V-BLOCKS IN 1 BOX
299.DESCRIPTION: HEIMATIC MIYANO LIVE TOOL HOLDER
300.DESCRIPTION: MIYANO LIVE TOOL HOLDER
301.DESCRIPTION: 2 MIYANO LIVE TOOL HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
302.DESCRIPTION: MIYANO LIVE TOOL HOLDER
303.DESCRIPTION: MIYANO LIVE TOOL HOLDER
304.DESCRIPTION: COLLETS W/ HOLDERS
305.DESCRIPTION: BROWN & SHARPE CROSS SLIDE HOLDERS
306.DESCRIPTION: CIRCULAR FORM TOOLS IN 1 BOX
307.DESCRIPTION: HIGH SPEED CUTTERS IN 1 BIN
308.DESCRIPTION: GEARS IN 1 BOX
309.DESCRIPTION: SWISS TOOL WEDGES IN 1 BOX
310.DESCRIPTION: KNURLING TOOLS IN 1 BOX
311.DESCRIPTION: BROACH TOOLING IN 1 BOX
312.DESCRIPTION: KENNEMETAL CARBIDE INSERT HOLDERS IN 1 BOX
313.DESCRIPTION: BROWN & SHARPE TURRET HOLDERS IN 1 BOX
314.DESCRIPTION: KENNEMETAL & MISC. CARBIDE INSERT HOLDERS IN 1 BOX
315.DESCRIPTION: TOOL HOLDERS IN 1 BOX
316.DESCRIPTION: 5C COLLETS IN 2 RACKS & 1 BIN
317.DESCRIPTION: COLLET SLEEVES IN 1 BOX
318.DESCRIPTION: 21) 1-1/2" COLLETS IN 1 BOX
319.DESCRIPTION: 23) 2" COLLETS IN 1 BOX
320.DESCRIPTION: MISTER SPRAY PUMP
321.DESCRIPTION: 8' HEAVY DUTY STEEL TABLE
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
322.DESCRIPTION: CARBIDE CUTTERS IN 1 BOX
323.DESCRIPTION: HIGH SPEED CUTTERS IN 1 BOX
324.DESCRIPTION: HIGH SPEED CUTTERS IN 1 BOX
325.DESCRIPTION: CARBIDE CUTTERS IN 1 BOX
326.DESCRIPTION: CARBIDE BIT HOLDERS IN 1 BOX
327.DESCRIPTION: CARBIDE BIT HOLDERS IN 1 BOX
328.DESCRIPTION: ASSORTED COLLET HOLDERS IN 1 BOX
329.DESCRIPTION: KENNEMETAL CARBIDE INSERT HOLDERS IN 1 BOX
330.DESCRIPTION: CARBIDE THREAD TOOLS IN 1 BOX
331.DESCRIPTION: Z PUSHER TUBES
332.DESCRIPTION: ASSORTED CARBIDE INSERTS IN 1 BOX
333.DESCRIPTION: ASSORTED BORING BARS IN 1 BOX
334.DESCRIPTION: ASSORTED CARBIDE INSERTS IN 3 BINS
335.DESCRIPTION: WARNER & SWASEY TOOL HOLDERS
336.DESCRIPTION: CARBIDE INSERTS IN 1 BOX
337.DESCRIPTION: CARBIDE INSERTS IN 1 BOX
338.DESCRIPTION: HEAVY DUTY STEEL TABLE W/ 5" RIDGID VISE, 40" X 41"
339.DESCRIPTION: MACHINE FIXTURE
340.DESCRIPTION: HIGH SPEED TOOLING IN 1 BOX
341.DESCRIPTION: BROWN & SHARPE TOOL SLIDES IN 1 BOX
342.DESCRIPTION: BROWN & SHARPE TOOL SLIDES IN 1 BOX
343.DESCRIPTION: BROWN & SHARPE TOOL SLIDES IN 1 BOX
344.DESCRIPTION: 7 BROWN & SHARPE TOOL SLIDES
345.DESCRIPTION: VERTICAL HOLDERS IN 1 BOX
346.DESCRIPTION: 8 BROWN & SHARPE TOOL SLIDES
347.DESCRIPTION: MB2 #3 BUSHING SET
348.DESCRIPTION: R8 END MILL HOLDER
349.DESCRIPTION: ASSORTED PRECISION
350.DESCRIPTION: COLLET CLOSER
351.DESCRIPTION: SPELLMAN R421, 1/8" - 43/64", 1" OD ADAPTER BUSHING SET
352.DESCRIPTION: 18 DRAWER PARTS CABINET W/ CONTENTS
353.DESCRIPTION: DRILL BUSHINGS IN 1 BUCKET
354.DESCRIPTION: DRILL BITS & BUSHINGS IN 1 BUCKET
355.DESCRIPTION: CUTTERS & MISC. IN 1 BOX
356.DESCRIPTION: 6' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
357.DESCRIPTION: YUASA COLLET INDEXER
358.DESCRIPTION: LIVE CENTER
359.DESCRIPTION: TOOL POST W/ SLIDES
360.DESCRIPTION: 2 STRAIGHT EDGES & DIAL GAGE
361.DESCRIPTION: 2 MITSUBISHI SERVO MOTORS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
362.DESCRIPTION: GEOMETRIC THREAD CHASERS IN 1 BOX
363.DESCRIPTION: GEOMETRIC THREAD CHASERS IN 1 BOX
364.DESCRIPTION: GEOMETRIC THREAD CHASERS IN 1 BOX
365.DESCRIPTION: GEOMETRIC THREAD CHASERS IN 1 BOX
366.DESCRIPTION: HARDINGE COLLET PADS IN 1 CAN
367.DESCRIPTION: KNURLING WHEELS IN 2 BOXES
368.DESCRIPTION: GAGE TALKER RS232 DIGITAL GAGE PORT-NT
369.DESCRIPTION: ASSORTED STUB COLLETS IN 1 BOX
370.DESCRIPTION: ASSORTED STUB COLLETS IN 1 BOX
371.DESCRIPTION: MISC. ELECTRICAL W/ ENERGIZER 2CR5 BATTERIES
372.DESCRIPTION: HARDINGE & MISC. IN BIN & 2 BOXES
373.DESCRIPTION: 6' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
374.DESCRIPTION: 3-1/2" 932 BEARING BRONZE
375.DESCRIPTION: GEOMETRIC DIE HEADS PARTS IN 1 BOX
376.DESCRIPTION: 1955 WARNER & SWASEY 1AC MANUAL
377.DESCRIPTION: COLLET PUSHERS & MISC. IN 2 BOXES
378.DESCRIPTION: HARDINGE CROSS SLIDE W/ TAPER TURNING HOLDER
379.DESCRIPTION: 6' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
380.DESCRIPTION: 2 SMALL PARTS CABINETS W/ CONTENTS
381.DESCRIPTION: 3' PORTABLE STEEL CART
382.DESCRIPTION: PORTABLE SCRAP BIN W/ SCRAPERS
383.DESCRIPTION: PORTABLE STEEL CART
384.DESCRIPTION: 2 BAR FEED STANDS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
385.DESCRIPTION: PORTABLE STEEL CART
386.DESCRIPTION: SCRAPERS IN 1 BUCKET
387.DESCRIPTION: 5' FOLDING TABLE W/ CHAIR & CONTENTS
388.DESCRIPTION: 4" VERTICAL 1/2 HP BELT SANDER
389.DESCRIPTION: MISC. BROWN & SHARPE TOOLING & FIXTURES ON STEEL SHELF UNIT
390.DESCRIPTION: CONTENTS OF BENCH
391.DESCRIPTION: 6' STEEL BENCH (NO CONTENTS)
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
392.DESCRIPTION: ULTRAMATIC & #2 LEAD CAMS & CROSS SLIDES ON BOARD
393.DESCRIPTION: 5 BROWN & SHARPE #2 TURNING HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 5
394.DESCRIPTION: 4 BROWN & SHARPE #2 TURNING HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 4
395.DESCRIPTION: BROWN & SHARPE #2 TURNING HOLDER
396.DESCRIPTION: 7 BROWN & SHARPE TURNING HOLDERS 0G
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 7
397.DESCRIPTION: 4 ASSORTED DIE HEADS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 4
398.DESCRIPTION: ULTRAMATIC ELECTROMECHANICAL CLUTCH
399.DESCRIPTION: 16 BROWN & SHARPE 1/2" COLLET SLEEVES
400.DESCRIPTION: 10 BROWN & SHARPE 22C COLLET SLEEVES
401.DESCRIPTION: 4 BROWN & SHARPE TURNING HOLDERS 00G
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 4
402.DESCRIPTION: 3 BROWN & SHARPE KNURLING HOLDERS
403.DESCRIPTION: 3 BROWN & SHARPE THREAD ROLL HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 3
404.DESCRIPTION: 2 BROWN & SHARPE CIRCULAR TOOL HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
405.DESCRIPTION: BROWN & SHARPE SCISSOR TYPE KNURLING HOLDER
406.DESCRIPTION: 2 BROWN & SHARPE DRILL HOLDERS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
407.DESCRIPTION: BROWN & SHARPE TIMING GEARS
408.DESCRIPTION: BROWN & SHARPE RPM GEARS
409.DESCRIPTION: 10 COLLET PUSHERS
410.DESCRIPTION: 3 COLLETS & 3 SLEEVES
411.DESCRIPTION: MISC. COLLETS & BUSHINGS IN 1 BOX
412.DESCRIPTION: PARTS CABINET W/ HARDINGE COLLET PADS
413.DESCRIPTION: 18 DRAWER CABINET W/ CONTENTS
414.DESCRIPTION: 6 DRAWER CABINET W/ DRILL BITS
415.DESCRIPTION: 6 DRAWER CABINET W/ ASSORTED TAPS & CHASERS
416.DESCRIPTION: 2) 6' STEEL BENCHES
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
417.DESCRIPTION: 2 DOOR CABINET W/ CONTENTS
418.DESCRIPTION: TURRET TOOL HOLDERS ON 1 WOOD RACK
419.DESCRIPTION: MULTI-DRAWER CABINET W/ MISC. TOOLING
420.DESCRIPTION: COLLET RACK W/ WOOD BENCH
421.DESCRIPTION: BROWN & SHARPE 0G CROSS SLIDE & LEAD CAMS ON 1 BOARD
422.DESCRIPTION: MULTI DRAWER STEEL CABINET W/ CONTENTS
423.DESCRIPTION: STEEL SHELF UNITS W/ CONTENTS
424.DESCRIPTION: 2 STEEL PARTS CABINETS W/ CONTENTS
425.DESCRIPTION: BALDOR 3/4 HP DOBULE END PEDESTAL GRINDER
426.DESCRIPTION: ROTARY BIN W/ CONTENTS
427.DESCRIPTION: CABINET W/ CONTENTS & 3 TIER SHELF UNIT
428.DESCRIPTION: HEAVY DUTY STEEL TABLE, SHELF UNIT & WOOD STAND
429.DESCRIPTION: 2 DOOR CABINET W/ GRINDING WHEELS & MISC.
430.DESCRIPTION: MISC. MACHINE PARTS ALONG WALL & ON STEEL SHELF UNIT
431.DESCRIPTION: DOUBLE END GRINDER ON PEDESTAL STAND
432.DESCRIPTION: PARTS CABINET W/ CONTENTS
433.DESCRIPTION: EQUIPTO 18 DRAWER CABINET W/ CONTENTS
434.DESCRIPTION: PUSHER TUBE
435.DESCRIPTION: COLLET PADS IN 1 BOX
436.DESCRIPTION: 6 COLLETS
437.DESCRIPTION: 8 PUSHER SLEEVES
438.DESCRIPTION: 6' STEEL BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
439.DESCRIPTION: ASSORTED PARTS CABINETS & FILE CABINET W/ CONTENTS
440.DESCRIPTION: ASSORTED BINS
441.DESCRIPTION: 2 DOOR CABINET W/ PARTS CABINETS
442.DESCRIPTION: 2 DOOR CABINET W/ CONTENTS
443.DESCRIPTION: ASSORTED GARBAGE CANS
444.DESCRIPTION: 2 DOOR CABINET W/ CONTENTS
445.DESCRIPTION: 2 CHIP CARTS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
446.DESCRIPTION: 15 STEP PORTABLE STAIRS
447.DESCRIPTION: PITTSBURGH 1 TON TELESCOPING GANTRY CRANE W/ 1,300# ELECTRIC HOIST
448.DESCRIPTION: DUMP HOPPER
449.DESCRIPTION: PATTON MACH 30 INDUSTRIAL FAN
450.DESCRIPTION: PATTON INDUSTRIAL FAN
451.DESCRIPTION: PATTON INDUSTRIAL FAN
452.DESCRIPTION: 2 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
453.DESCRIPTION: STEEL BIN
454.DESCRIPTION: 2 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
455.DESCRIPTION: 2 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
456.DESCRIPTION: 2 WOOD SHIPPING CRATES
457.DESCRIPTION: 1998 CHEVROLET 3500 CHEYENNE SINGLE AXLE 12' STAKE TRUCK, AUTOMATIC TRANSMISSION
VIN #: 1GCBJC34RXWF070346
ODOMETER READS: 157,337 MILES
458.DESCRIPTION: TOW MOTOR MODEL V40 5,000# CAPACITY FORK LIFT TRUCK, DUAL MAST, PROPANE POWERED, YARD TIRES (NO BRAKES, NO TANK)
MORE INFO: NOTE: LATE DELIVERY
SERIAL #: 76M372
459.DESCRIPTION: 19 STACKABLE STOCK RACKS
460.DESCRIPTION: ASSORTED ROUND & SQUARE STOCK W/ 24 STACKABLE RACKS
461.DESCRIPTION: LARGE QUANTITY OF BUCKETS & PAILS
462.DESCRIPTION: SE-CUR-ALL SELF CLOSING RINSE TANK W/ FLUID
463.DESCRIPTION: STRAINERS IN WOOD CRATE
464.DESCRIPTION: ASSORTED STEEL BINS
465.DESCRIPTION: SAFETY-KLEEN PARTS CLEANER/TUMBLER W/ FEEDER STAND
466.DESCRIPTION: STERLING MODEL 825 COUNTING SCALE
467.DESCRIPTION: TRANCELL MODEL DC39 DIGITAL SCALE
468.DESCRIPTION: 6' STEEL WORK BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
469.DESCRIPTION: METAL CABINET & A-FRAME RACK
470.DESCRIPTION: ASSORTED GRINDING WHEELS
471.DESCRIPTION: 2 SHELF UNITS, 4' X 2' X 3'
472.DESCRIPTION: MISC. ON SHELF UNIT W/ SHELF UNIT
473.DESCRIPTION: COLLETS & PUSHERS ON 1 A-FRAME BOARD
474.DESCRIPTION: ASSORTED SIZE COLLETS ON 1 A-FRAME RACK
475.DESCRIPTION: STEEL WORK TABLE, 48" X 24" X 30"
475A.DESCRIPTION: PORTABLE CHIP CART
476.DESCRIPTION: 3 TIER SHELF UNIT, 4' X 4' X 3'
478.DESCRIPTION: BROTHER HL-5140 LASER PRINTER
479.DESCRIPTION: IQ 5000 ELECTRONIC COUNTING SCALE
481.DESCRIPTION: NASHUA TAPE DISPENSER
482.DESCRIPTION: 16' X 4' WOOD WORK BENCH
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
483.DESCRIPTION: BOX STAPLER
484.DESCRIPTION: LATHEM TIME CLOCK W/ RACK
485.DESCRIPTION: 2) 9' X 4-1/2' X 7" RACKS
486.DESCRIPTION: PORTABLE DOUBLE SIDED ORGANIZER RACK W/ PLASTIC BINS
487.DESCRIPTION: PORTABLE DOUBLE SIDED ORGANIZER RACK W/ PLASTIC BINS
488.DESCRIPTION: 14 STACKABLE STEEL STORAGE BINS
489.DESCRIPTION: 154 STACKABLE STEEL STORAGE BINS
490.DESCRIPTION: 114 STACKABLE STEEL STORAGE BINS
492.DESCRIPTION: 34 STACKABLE STEEL STORAGE BINS
493.DESCRIPTION: 126 STACKABLE STEEL STORAGE BINS
494.DESCRIPTION: PORTABLE DOUBLE SIDED ORGANIZER RACK W/ BINS (NO CONTENTS)
495.DESCRIPTION: APPROX. 100 STACKABLE STEEL STORAGE BINS
496.DESCRIPTION: 10 CASES OF C-FOLD TOWELS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 10
497.DESCRIPTION: 4 SECTIONS OF 8' X 42" X 11' PALLET RACK
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 4
498.DESCRIPTION: 10' WOOD STEP LADDER
499.DESCRIPTION: DUMP HOPPER
500.DESCRIPTION: MISC. TOOLING ON 1 SKID
501.DESCRIPTION: DUAL BARREL CART
503.DESCRIPTION: STEEL STOCK RACKS ALONG WALL
504.DESCRIPTION: POWERMATIC 1200 DRILL PRESS W/ PROCUNIER TAPPING HEAD
505.DESCRIPTION: ASSORTED ROUND STOCK (BRASS, ALUMINUM & MISC.) ON 5 SECTIONS OF RACKS W/ RACKS
MORE INFO: NOTE: CERTIFIED STEEL
506.DESCRIPTION: ASSORTED ROUND & SQUARE STOCK ON 21 SECTIONS OF RACKS W/ RACKS
MORE INFO: NOTE: CERTIFIED STEEL
507.DESCRIPTION: ASSORTED SIZE ROUND STOCK & BAR STOCK IN MIDDLE OF ROOM
MORE INFO: NOTE: CERTIFIED STEEL
508.DESCRIPTION: MISC. PARTS, MACHINES & COMPONENTS
509.DESCRIPTION: MISC. MACHINE PARTS ON 1 SHELF & UNDER PALLET RACK
510.DESCRIPTION: MISC. COMPUTERS & COMPONENTS ON 2 SKIDS
511.DESCRIPTION: PEDESTAL FAN (ON TOP OF PALLET RACK)
512.DESCRIPTION: SECTION OF 8' X 42" X 11' PALLET RACK
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
513.DESCRIPTION: FARMHAND 125 MIX FLUXCORE WIRE FEED WELDER
514.DESCRIPTION: STEEL WELDING TABLE
515.DESCRIPTION: INGERSOL RAND MODEL T-30 VERTICALLY MOUNTED TANK AIR COMPRESSOR (PARTS ONLY)
516.DESCRIPTION: 24' FIBERGLASS EXTENSION LADDER
517.DESCRIPTION: SHIPPING BOXES ON 4 SKIDS
518.DESCRIPTION: MACHINE PARTS & MISC. ON 5 SECTIONS OF PALLET RACK (NO PAPERWORK OR BOXES)
519.DESCRIPTION: 5 SECTIONS OF 8' X 42" X 12' PALLET RACK
MORE INFO: NOTE: THIS ITEM CAN NOT BE REMOVED UNTIL THE THIRD DAY OF REMOVAL
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 5
520.DESCRIPTION: BROWN & SHARPE SCREW MACHINE (PARTS ONLY)
521.DESCRIPTION: 6 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 6
522.DESCRIPTION: 10 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 10
523.DESCRIPTION: 10 STEEL BINS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 10
524.DESCRIPTION: SINGLE DOOR CABINET W/ CONTENTS
525.DESCRIPTION: PATTON MACH 30 INDUSTRIAL FAN
526.DESCRIPTION: PATTON MACH 30 INDUSTRIAL FAN
527.DESCRIPTION: DAYTON INDUSTRIAL FAN
528.DESCRIPTION: 96 STACKABLE STEEL PARTS BINS
529.DESCRIPTION: 29 STACKABLE STEEL PARTS BINS
530.DESCRIPTION: 48 STACKABLE STEEL PARTS BINS
531.DESCRIPTION: SIMPLE CENTRIFUGE OIL SPINNER (NO TANK)
532.DESCRIPTION: 2 HON LATERAL FILE CABINETS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
533.DESCRIPTION: HON FILE CABINET & CARD FILES
534.DESCRIPTION: HON LATERAL FILE CABINET
535.DESCRIPTION: 6 BOOKSHELVES W/ BOOKS (APPROX. 450)
536.DESCRIPTION: FRAMED WORLD MAP
537.DESCRIPTION: U-SHAPED DESK W/ SWIVEL CHAIR & 2 ARM CHAIRS
538.DESCRIPTION: 2 HON LATERAL FILE CABINETS
"THIS LOT IS BEING SOLD PER PIECE, YOU ARE BIDDING ON THE FOLLOWING QUANTITY": 2
539.DESCRIPTION: U-SHAPED DESK W/ SWIVEL CHAIR & ARM CHAIR
540.DESCRIPTION: GLASS FRONT DISPLAY CABINET (NO CONTENTS)
543.DESCRIPTION: COFFEE TABLE, SIDE TABLE & 2 CHAIRS
544.DESCRIPTION: BROTHER MFC-L2740DW MULTI FUNCTION PRINTER W/ CABINET
545.DESCRIPTION: PANASONIC UF-790 FAX MACHINE W/ STAND
546.DESCRIPTION: HON LATERAL FILE CABINET
547.DESCRIPTION: FRAMED PRINT
548.DESCRIPTION: 2 SIDE ARM CHAIRS
549.DESCRIPTION: 2 DOOR STORAGE CABINET & 2 SHELF UNITS
550.DESCRIPTION: SCOTT MODEL 2612 CONSOLE SOLID STATE STEREO & DUAL TURN TABLE
551.DESCRIPTION: IBM WHEELWRITER 6 TYPE WRITER
552.DESCRIPTION: 2 HON FILE CABINETS
552A.DESCRIPTION: DESK & SWIVEL CHAIR
553.DESCRIPTION: PACE MASTER BRONZE BASIC TREADMILL
554.DESCRIPTION: SYLVANIA 32" HDTV W/ BUILT IN DVD PLAYER
555.DESCRIPTION: 12' CONFERENCE TABLE W/ 5 SWIVEL CHAIRS
556.DESCRIPTION: FAVORITE VINTAGE OVEN/STOVE COMBO
557.DESCRIPTION: 42" SQUARE TABLE W/ 4 CHAIRS
558.DESCRIPTION: BUNN COFFEE MAKER, TOASTER OVEN & KITCHEN SUPPLIES IN 1 BOX
559.DESCRIPTION: ABSOPURE WATER DISPENSER W/ JUGS
560.DESCRIPTION: ASSORTED LIVE PLANTS

Copyright © 2020, williamsandlipton.com